273016e8 cy Jan. 24, 2022, 5:58 a.m.
Vendor import GA release of unbound 1.14.0.

MFC after:      2 weeks

Merge commit '9b87431a326169e72d5ca55670cb3c95205aa350' into unbound/main
cgit
dea952c3 kevlo Jan. 24, 2022, 5:38 a.m.
This fixes the standalone build.
cgit
a4efbe0d eugen Jan. 24, 2022, 4:17 a.m.
MFC after:	1 month
cgit
e3bad5f7 eugen Jan. 24, 2022, 4:09 a.m.
Let "fetch -a" resume truncated transfer automatically
perform another attempt if it obtained some new data in previous one
making progress.

This makes it more robust against frequent but transient network failures.
For example:

=> sqlite-src-3370200.zip doesn't seem to exist in /usr/ports/distfiles/.
=> Attempting to fetch https://www.sqlite.org/2022/sqlite-src-3370200.zip
sqlite-src-3370200.zip                          3% of   12 MB   45 kBps 04m24s
fetch: sqlite-src-3370200.zip appears to be truncated: 524288/13145234 bytes
sqlite-src-3370200.zip                         10% of   12 MB   67 kBps 02m56s
fetch: sqlite-src-3370200.zip appears to be truncated: 1327104/13145234 bytes
sqlite-src-3370200.zip                         28% of   12 MB  123 kBps 01m14s
fetch: sqlite-src-3370200.zip appears to be truncated: 3735552/13145234 bytes
sqlite-src-3370200.zip                         54% of   12 MB  253 kBps    24s
fetch: sqlite-src-3370200.zip appears to be truncated: 7176192/13145234 bytes
sqlite-src-3370200.zip                         62% of   12 MB   90 kBps    55s
fetch: sqlite-src-3370200.zip appears to be truncated: 8241152/13145234 bytes
sqlite-src-3370200.zip                         82% of   12 MB  113 kBps    20s
fetch: sqlite-src-3370200.zip appears to be truncated: 10862592/13145234 bytes
sqlite-src-3370200.zip                                  12 MB  185 kBps    12s
===> Fetching all distfiles required by sqlite3-3.37.2,1 for building

MFC after:	1 month
cgit
f72926ea rmacklem Jan. 23, 2022, 10:17 p.m.
PR#254282 reports a problem where nullfs mounts cannot be
exported via mountd for FreeBSD 13.0.

The problem seems to be that, to do the nullfs mounts in
/etc/fstab, they require the "late" mount option, so that the
underlying filesystem is mounted (ZFS for the PR).

Adding "mountlate" to the REQUIRE list in /etc/rc.d/mountd
fixes the problem, but that results in a dependency cycle
because /etc/rc.d/lockd specifies:

REQUIRE: nfsd
BEFORE: DAEMON
--> which forces mountd to preceed DAEMON.

This patch removes "nfsd" from REQUIRE for lockd and statd,
then adds mountlate to REQUIRE for mountd, to fix this
problem.  Having lockd REQUIRE nfsd was done in the NetBSD
code when it was pulled into FreeBSD and there does not
seem to be a need for this.

In case this causes problems, a long MFC has been specified.

PR:	254282
Differential Revision:	https://reviews.freebsd.org/D33256
MFC after:	3 months
cgit
45f0e571 emaste Jan. 23, 2022, 8:04 p.m.
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D30333
cgit
8a5b4859 mw Jan. 23, 2022, 7:48 p.m.
Some of the changes in this release:
- IPv6 L4 checksum offload fixes.
- Optimization of the Tx req_id validation.
- Timer service adjustments.
- NUMA awareness for the kernel RSS mode.

Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
cgit
95161adf mw Jan. 23, 2022, 7:48 p.m.
Verified spelling in the README and fixed the typos.

Also updated the contact section by removing Artur and adding Dawid
Gorecki who is now the second ENA FreeBSD driver developer.

Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
cgit
d10ec3ad mw Jan. 23, 2022, 7:48 p.m.
If the device becomes unresponsive, the driver will not be able to
finish the reset process correctly. Timeout during version validation
indicates that the device is currently not responding. In that case
do not perform the reset and instead reschedule timer service. Because
of that the driver will continue trying to reset the device until it
succeeds or is detached.

Submitted by: Dawid Gorecki <dgr@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
cgit
78554d0c mw Jan. 23, 2022, 7:48 p.m.
The timer service was started when the interface was brought up and it
was stopped when it was brought down. Since ena_up requires the device
to be responsive, triggering the reset would become impossible if the
device became unresponsive with the interface down.

Since most of the functions in timer service already perform the check
to see if the device is running, this only requires starting the callout
in attach and stopping it when bringing the interface up or down to
avoid race between different admin queue calls.

Since callout functions for timer service are always called with the
same arguments, replace callout_{init,reset,drain} calls with
ENA_TIMER_{INIT,RESET,DRAIN} macros.

Submitted by: Dawid Gorecki <dgr@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
cgit
b168d0c8 mw Jan. 23, 2022, 7:38 p.m.
Since `ena_com_tx_comp_req_id_get` already checks for `req_id` validity,
the logic was exiting early, never giving `validate_tx_req_id` a chance
to trigger device reset.
Rewrite the logic so that device reset is called based on return value
of `ena_com_tx_comp_req_id_get` instead.

Submitted by: Artur Rojek <ar@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
cgit
2bbef9d9 mw Jan. 23, 2022, 7:38 p.m.
ena_tx_csum function did not check if IPv6 checksum offload was
requested it only checked checksum offloading flags for IPv4 packets.
Because of that, when encountering CSUM_IP6_* flags, the function simply
returned without actually setting checksum offloading in ena_ctx.
Check CUSM_IP6_* flags to enable IPv6 checksum offload.

Additionally, only IPv4 header was being parsed regardless of EtherType
field, because of that, value of L4 protocol read when actually trying
to send IPv6 packets was wrong. Use ip6_lasthdr function to get length
of all IPv6 headers and payload protocol.

Set the DF flag to 1 in order to allow the device to offload the IPv6
checksum calculation and achieve optimal performance.

Add CSUM6_OFFLOAD and CSUM_OFFLOAD definitions into ena_datapath.h.

Submitted by: Dawid Gorecki <dgr@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
cgit
eb4c4f4a mw Jan. 23, 2022, 7:27 p.m.
Merge commit '2530eb1fa01bf28fbcfcdda58bd41e055dcb2e4a'

Adjust the driver to the upgraded ena-com part twofold:

First update is related to the driver's NUMA awareness.

Allocate I/O queue memory in NUMA domain local to the CPU bound to the
given queue, improving data access time. Since this can result in
performance hit for unaware users, this is done only when RSS
option is enabled, for other cases the driver relies on kernel to
allocate memory by itself.

Information about first CPU bound is saved in adapter structure, so
the binding persists after bringing the interface down and up again.

If there are more buckets than interface queues, the driver will try to
bind different interfaces to different CPUs using round-robin algorithm
(but it will not bind queues to CPUs which do not have any RSS buckets
associated with them). This is done to better utilize hardware
resources by spreading the load.

Add (read-only) per-queue sysctls in order to provide the following
information:
- queueN.domain: NUMA domain associated with the queue
- queueN.cpu:    CPU affinity of the queue

The second change is for the CSUM_OFFLOAD constant, as ENA platform
file has removed its definition. To align to that change, it has been
added to the ena_datapath.h file.

Submitted by: Artur Rojek <ar@semihalf.com>
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
cgit
5025e850 mm Jan. 23, 2022, 8:27 a.m.
Add missing source file lz4_zfs.c to sys/conf/files
cgit
e92ffd9b mm Jan. 22, 2022, 10:05 p.m.
Notable upstream pull request merges:
  #12766 Fix error propagation from lzc_send_redacted
  #12805 Updated the lz4 decompressor
  #12851 FreeBSD: Provide correct file generation number
  #12857 Verify dRAID empty sectors
  #12874 FreeBSD: Update argument types for VOP_READDIR
  #12896 Reduce number of arc_prune threads
  #12934 FreeBSD: Fix zvol_*_open() locking
  #12947 lz4: Cherrypick fix for CVE-2021-3520
  #12961 FreeBSD: Fix leaked strings in libspl mnttab
  #12964 Fix handling of errors from dmu_write_uio_dbuf() on FreeBSD
  #12981 Introduce a flag to skip comparing the local mac when raw sending
  #12985 Avoid memory allocations in the ARC eviction thread

Obtained from:	OpenZFS
OpenZFS commit:	17b2ae0b24d487fdda2ef1098ec26fa7f79a61f6
cgit